RJ45 1*4port Right Angle DIP type connector
P/N: HG04A10P8C
The RJ45 consists of a plug and a receptacle, two components that form a connector to connect between wires for electrical continuity of the wires.
The heart of the RJ45 module is the modular jack. The gold-plated wire or socket holes maintain a stable and reliable electrical connection with the modular socket shrapnel. Electrical contact is further enhanced with the insertion of the plug due to the frictional effect between the shrapnel and the jack. The jack body is designed with an integral locking mechanism so that when the modular plug is inserted, maximum pull-out strength is generated outside the interface between the plug and the jack. the terminal block on the RJ45 module connects the twisted pair cable through a "U" shaped slot and the locking tabs hold the RJ45 module in place on the information exit device such as a panel.
Product Parameters
1.Material:
HOUSING: GLASS FILLED POLYESTER(UL94V-0)
CONTACT: PHOSPHOR BRONZE
SHELL: PHOSPHOR BRONZE
2.FINISH:
CONTACT: AU PLATING OVER NI(50m" MIN.)
SHELL: NI PLATING.
3.ELECTRICAL:
CONTACT RESISTANCE: 50 mΩ MAX.
INSULATION RESISTANCE: 500MΩ Min.
DIELECTRIC WITHSTANDING VOLTAGE: 1000V AC
CURRENT RATING: 1.5A
4.ENVIRONMENTAL:
OPERATING TEMPERATURE: -40°C TO +105°C